YachtStrip

1. what type of boat do you have

2. enter the dimensions of your yacht

< Move the red dots >

Waterline length

0.00
 m
0.00
 ft
 m

Depth

0.00
 m
0.00
 ft
 m

Width

0.00
 m
0.00
 ft
 m

Surface area of your underwater hull

0.00
 m2

3. type and quantity of your antifouling

Number of AF layers

0.00

required (AF removal):

 
0.00
 kg/m2
 
0.00
 kg

4. would you also like to remove primer

How many primer layers

0.00

required (primer removal):

0.00
 kg/m2
0.00
 kg

Your YachtStrip project requirements

0.00
 kg
to the shop

Important! If your boat has been left in the sun for a long time, we recommend roughly sanding the antifouling. UV rays sometimes harden antifouling coatings considerably. In this case, sanding with coarse sandpaper is often the solution.

This demand calculator is intended to give you a basis for YachtStrip consumption. Since the quantities always depend on your respective project and your antifouling situation, any liability regarding the calculated quantities or your consumption is excluded. We always recommend several test areas like ours Application page described and to determine the consumption quantities and the effective times more precisely through these tests. Please also note the effect of temperatures, which can sometimes have a significant influence on the effective times. Basically, dissolved antifouling or primer should be removed as soon as the layers are well dissolved. If the respective effective times are exceeded, gelcoat may also be dissolved.